Orbital steady motions of a system of two bodies with an elastic connection

Steady motions of a pair of mass points connected by a rigid rod were studied by Abrarova and Karapetyan [1], the motions of a pair of mass points connected by an elastic spring were considered by Burov and Stepanov [2]. The present article is devoted to the existence, stability and bifurcation of the steady motions for a system composed of two bodies connected by an elastic torsional spring. Each of these bodies is a massless bar with mass points at the ends. One supposes that these bars are elastically connected and the system moves in the plane of the orbit of its mass centre. The trivial steady motions are studied (the principal axes of inertia of the system are directed as the radius-vector of the centre of inertia and as the tangent to the orbit). The non-trivial steady motions (the principal axes of inertia of the system are not directed as the radius vector or as the tangent to the orbit and the bars are not orthogonal each other) are also studied. We expose the complete study of the stability and of the bifurcation diagrams.     

50CrVA钢汽车扭杆弹簧热处理工艺研究

通过对50CrVA钢汽车扭杆弹簧热处理工艺进行研究并结合现场条件发现，其热处理最佳淬火加热温度为880℃；回火最佳温度为300℃且最佳硬度为48-52HRC。     

中华世纪坛旋转圆坛静载荷测试方法的探讨

介绍了中华世纪坛旋转圆坛静载荷测试的两种方法:准静态测试和通过测量碟簧压缩量计算载荷,并针对旋转圆坛的具体特点对这两种方法进行分析和比较。     

零长弹簧及其在移动式重力仪中的装配精度需求

阐述了零长弹簧的工作原理和装配方法,分析了在CHZ-Ⅱ型海洋重力仪和具有机械放大作用的斜拉弹簧重力仪中应用零长弹簧原理时,对探头装配和调节工艺的精度需求.当在垂直于弹簧的扰动达到100Gal的动基座上应用零长弹簧时,为使弹簧自重引起的系统误差不大于0.5mGal,典型情形下弹簧零长的补偿误差需在1mm以内.     

复合式空气弹簧的开发设计

针对国内汽车空气弹簧市场需求，开发出由胶囊和减振器装配成一体的复合式空气弹簧，该结构产品取代传统的螺旋弹簧减振器，即解决了空气悬挂空间狭小的问题，又实现了空气弹簧的变刚度调节，大大降低悬挂系统的固有频率，提高了乘车的舒适性和稳定性。借助有限元分析软件进行汽车空气弹簧的性能参数计算，确定了半成品的裁断角度等技术参数，通过产品试验，验证了有限元计算及工艺参数选取的正确性。     

CMG中角接触球轴承在随机振动下的安全性分析

研究CMG中角接触球轴承在随机振动下的安全性。推导轴承在轴向力和径向力联合作用下的轴向刚度和径向刚度,建立轴承的等效线性弹簧模型,并利用ANSYS的谱分析迭代求取轴承在随机振动下的轴向力和径向力,将径向当量静载荷和轴向载荷分别与径向基本额度静载荷和极限轴向载荷比较,分析其安全性。以某种角接触球轴承为例,验证了其在给定输入功率谱密度下任意方向加载都安全。     

Improvements in and actual performance of the Plant Experiment Unit onboard Kibo,the Japanese experiment module on the international space station

In 2004, Japan Aerospace Exploration Agency developed the engineered model of the Plant Experiment Unit and the Cell Biology Experiment Facility. The Plant Experiment Unit was designed to be installed in the Cell Biology Experiment Facility and to support the seed-to-seed life cycle experiment of Arabidopsis plants in space in the project named Space Seed. Ground-based experiments to test the Plant Experiment Unit showed that the unit needed further improvement of a system to control the water content of a seedbed using an infrared moisture analyzer and that it was difficult to keep the relative humidity inside the Plant Experiment Unit between 70 and 80% because the Cell Biology Experiment Facility had neither a ventilation system nor a dehumidifying system. Therefore, excess moisture inside the Cell Biology Experiment Facility was removed with desiccant bags containing calcium chloride. Eight flight models of the Plant Experiment Unit in which dry Arabidopsis seeds were fixed to the seedbed with gum arabic were launched to the International Space Station in the space shuttle STS-128 (17A) on August 28, 2009. Plant Experiment Unit were installed in the Cell Biology Experiment Facility with desiccant boxes, and then the Space Seed experiment was started in the Japanese Experiment Module, named Kibo, which was part of the International Space Station, on September 10, 2009 by watering the seedbed and terminated 2 months later on November 11, 2009. On April 19, 2010, the Arabidopsis plants harvested in Kibo were retrieved and brought back to Earth by the space shuttle mission STS-131 (19A). The present paper describes the Space Seed experiment with particular reference to the development of the Plant Experiment Unit and its actual performance in Kibo onboard the International Space Station. Downlinked images from Kibo showed that the seeds had started germinating 3 days after the initial watering. The plants continued growing, producing rosette leaves, inflorescence stems, flowers, and fruits in the Plant Experiment Unit. In addition, the senescence of rosette leaves was found to be delayed in microgravity.     

空间可展结构卷尺铰链的设计与分析

卷尺弹簧是形状类似钢卷尺的一种构件,是一种单层开口柱面壳。可以利用其壳体屈曲性能,设计和研制出一种铰链结构。这种铰链结构具有独特的力学性能,它可以利用折叠时积聚的弹性应变能实现结构的自动展开而不需要其它的动力装置;在展开之后,又能够靠自身的刚度提供大型可展结构所需的锁定力,而不需要另外加设锁定装置。这种铰链可用于大型航天可展结构中,如可展的太阳翼等。     

一种修正的次优子集多项式回归法

提出以集合论为工具建立在抽象代数理论基础上的修正次优子集多项式回归法，对回归过程的主要内容进行了充分的数学描述和讨论，给出了一个重要的定理和推论。理论分析和实际计算发现，利用本文提出的修正次优子集回归法对给定的任意精度都可求出最佳逼近结果。     

弹簧锁片受力分析

采用弹性力学的分析方法，针对弹簧锁片这个延伸喷管的关键部分，建立了薄板的小挠度弯曲模型和单向压缩模型，对其在发动机工作过程中的受力状态进行了计算分析，从而对锁片设计提供了理论参考依据。